20W50 PHILLIPS AVIATION OIL "BREAK IN" TYPE M XC66 1 BOX 12 QUARTS

PHILLIPS 20W50 AVAITION OIL   

TYPE M OIL FOR "BREAK IN" OF NEWLY OVERHAULED ENGINES 

1 BOX  = 12 QUARTS 

We ship to all states in Australia 

Phillips 66 Type M Aviation Oil is an ashless, nondispersant, multigrade engine oil recommended for use in aircraft piston engines where the operator prefers a mineral oil-based engine oil that does not contain dispersant additives. It provides easier starting and quicker oil circulation at low temperatures compared with single-grade mineral oils, while maintaining high film strength at high temperatures and under high loads for protection against wear and piston scuffing. Type M Aviation Oil is used as break-in oil for newly overhauled engines where all-mineral type oils are recommended. The multigrade formulation helps reduce cylinder glazing tendency during break-in. Break-in normally is accomplished in less than 25 hours of engine operation.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: